Saddles

Well known for its long body and flat profile, the Phenom is the shape of choice for many of the best racers in the world, ranging from Tour of Flanders winner Kasper Asgreen to World DH Champion Loic Bruni. Like every saddle we make, the S-Works Phenom with Mirror was ergonomically designed and scientifically proven - our Body Geometry methodology - combined with our Mirror 3D printing - resulting in 28% less pressure, right where it counts. Body Geometry: We know that every body is different, but the issues facing riders in the saddle are the same — sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and even penile blood flow studies (yeah, we did that), Body Geometry and Mirror Saddles don't just promise to solve these issues for men and women — we've scientifically proven they do. SOFT TISSUE RELIEF: Using a concave shape and ultra-compliant carbon shell, we've created a space for a thicker Mirror print, using 20,055 struts and 8,735 nodes - resulting in a 28% reduction in sit bone pressure compared to a traditional foam saddle, measured by our ultra high-resolution pressure mapping. PERFORMANCE-INSPIRED SHAPING: Being our longest and flattest saddle from tail to nose, the S-Works Phenom with Mirror's shape and construction enables maximum movement for optimal positioning for power - enabling riders to easily adjust their position on the saddle for tempo efforts and supports riders movement in and out of the saddle on climbs. - Patented Body Geometry technology is ergonomically designed and scientifically proven to increase blood flow to sensitive arteries. - Longest and flattest, Mirror saddle, from nose to tail to date at 27cm. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light oversized carbon rails. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - NOTE: Oversized 7x9mm carbon rails are not compatible with seat posts equipped with side-load clamp mechanisms for 7mm round rails. - Size 143mm / Weight 223g - Size 155mm / Weight: 227g

The S-works Power Saddle with Mirror technology is the perfect reflection of you. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind honeycomb structure that offers superior sit-bone support and comfort. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light, strong, and oversized FACT carbon rails - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 190g - Size 155mm / Weight: 194g - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.

The Vento Argo 00 Adaptive short-nose performance racing saddle features 3D-printed padding for zonal cushioning comfort across the entire surface and full-carbon shell and rails to save weight without sacrificing support. - Fizik Adaptive 3D-printed padding creates the perfect match for those who want exceptional, long-lasting comfort on a versatile platform that provides both stability and balance - Adaptive saddle padding is crafted by Carbon using revolutionary Digital Light Synthesis technology - DLS is an additive manufacturing process which uses digital ultraviolet light projection, oxygen permeable optics and programmable liquid resins to produce parts with excellent mechanical properties, resolution and surface finish - High-module, full-carbon shell and rails, all tuned for maximum power transfer, without compromising on comfort

Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position. The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before. The bike may be the most sustainable transportation ever created, but we need to do more. The saddle's carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we're building a more sustainable carbon base. With the Power Pro's titanium rails, Mirror technology is now more durable than ever. It's so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It's the perfect reflection of you. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Titanium rails. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Approximate weight: 245g (Size 143mm) - Approximate weight: 251g (Size 155mm)

Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position. The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before. The bike may be the most sustainable transportation ever created, but we need to do more. The saddle's carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we're building a more sustainable carbon base. With the Power Pro's titanium rails, Mirror technology is now more durable than ever. It's so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It's the perfect reflection of you. - Titanium rails. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Approximate weight: 251g (Size 155mm) - Approximate weight: 245g (Size 143mm)

The Romin EVO Pro with Mirror starts with our Body Geometry methodology and combines this with our game-changing Mirror saddle technology to create an unmatched combination of performance and comfort. The saddle is designed for riders that prefer an agressive, performance inspired position that still protects soft tissue and blood flow. The result? 26% less pressure, right where it counts. PERFORMANCE MEETS COMFORT: The new Romin EVO Pro with Mirror saddle uses the exact same 3D printed pad as the S-Works Romin EVO Pro with Mirror but now comes with a nylon and reclaimed carbon fiber shell and hollow Ti rails. Our Romin EVO has been a favorite for our professional athletes and racers everywhere season after season. Its traditional long shape is designed to relieve pressure in aggressive, race-inspired positions while allowing the rider to slide backward and forward on the saddle to provide the ideal position for tempo climbing or maximum wattage efforts. Now with Mirror technology, the saddle reduces pressure by up to 26% compared to traditional foam saddles, validated with extensive high-resolution pressure mapping studies. It uses a 3D printed matrix with 22,200 struts and 10,700 nodes and features a unique concave shell to deliver our thickest Mirror pad yet. To ensure your fit is dialed, it comes in two widths: 155mm and 143mm. BODY GEOMETRY AND MIRROR: We know that every body is different, but the issues facing riders in the saddle are the same — sit bone pain, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and even penile blood flow studies (yeah, we did that), Body Geometry and Mirror Saddles don’t just promise to solve these issues for men and women — we’ve proved they do. Unlike traditional single-density foam, Mirror technology allows for infinite density tuning with a single material. But any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retül data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. DURABILITY AND SUSTAINABILITY: By using reclaimed carbon fiber in the shell, we’re keeping scrap carbon fiber out of landfills while creating a light and durable saddle. Add to this hollow Ti rails, and you’ve got a saddle light enough for performance road and XC riding - just 243 grams in a 143 mm width — and tough enough for gravel and trail riding. - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology pad features 22,200 struts and 10,700 nodes, all individually tuned. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Size 143mm / Weight: 239g - Size 155mm / Weight: 245g

Specialized's ultra-light S-Works Power saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra-wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries - Stiff FACT carbon fiber shell tuned for support and ride compliance - Super-light PU padding for comfort and support on longer rides - Ultra-light and strong oversized FACT carbon rails - Tough, light and water-resistant cover - Level 1 padding: Lightest level of padding; most direct connection to the bike - SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions - Weight: 143g (143mm), 155g (155mm)

The short saddle for long distances. In response to the ever-increasing demand for short saddles designed for long-distance riders, Selle Italia proposes SLR Boost Endurance Superflow. Here, the focus is on comfort, decidedly increased by the Light Gel Plus padding. This differentiates it from the SLR Boost and allows cyclists to enjoy improved comfort and perfect positioning on the saddle, even during long-distance pedaling. It's a saddle designed and conceived for those who make long journeys their life philosophy. - Shorter saddle designed to increase comfort on longer distance. - "Boost" short nose improves thigh clearance and saddle fit, and reduces weight - SuperFlow technology drastically reduces pressure in the perineal area - Light gel layer absorbs vibration and reduces pressure - Fibra-Tek cover, made from a strong, highly durable and lightweight technical microfiber material - Ti316 rails, made from titanium alloy, increase resistance and reduce weight versus standard rails - Selle Italia idmatch S3 / L3 - Dimensions: 248 x 130mm / 248 x 145mm - 202g (130mm) / 207g (145mm)

The Vento Argo R3 Adaptive is a versatile, short-nosed cycling saddle featuring the revolutionary zonal comfort of 3D-printed cushioning and the high strength-to-weight performance of the Kium hollow rail system. - Adaptive: Carbon Digital Light Synthesis 3D-printing technology, offering seamlessly engineered zonal cushioning - Argo: versatile short-nosed saddle that encourages stability and relieves pressure on soft tissue - R3: a combination of a ride-compliant, carbon-reinforced nylon shell and a Kium hollow rail with high strength-to-weight ratio

Arione R1: a saddle that delivers the best for those who demand lightness and flexibility. The Arione is longer than any other saddle, flat from nose to tail and with a narrow nose, so you can move around to find your power spot. Arione R1 features a composite carbon co-injected shell – with Wing Flex technology which enables flexibility where your thighs meet the saddle – and a Braided Carbon rail. It's light, flexible and agile, enabling you to perform at your optimum. - Composite carbon co-injected Nylon WingFlex shell - Carbon Braided 7x9mm rails - Thermowelded Black Microtex cover - Black Gummy Microtex Thigh Glides - Integrated Clip System compatible Regular: - Dimensions: 304mm x 126mm - Weight: 165g Large: - Dimensions: 300mm x 140mm - Weight: 175g

The SR Triathlon Saddle is designed for maximum performance. Two optimized saddle shapes reduce back fatigue, improve pedaling ergonomics and deliver full comfort, without excessively thick padding. The transition and ensuing running performance in the multi-sport discipline is noticeably improved. - Use: Triathlon / Time Trial - TiNox rails - Orthopedic Comfort Foam - Front nose width: 53 mm - for male riders who tilt their pelvis forward significantly and place more weight on the front area of the saddle. The V-shaped saddle - design therefore features a wide and short front section

The SR Triathlon Saddle is designed for maximum performance. Two optimized saddle shapes reduce back fatigue, improve pedaling ergonomics and deliver full comfort, without excessively thick padding. The transition and ensuing running performance in the multi-sport discipline is noticeably improved. - Use: Triathlon / Time Trial - TiNox rails - Orthopedic Comfort Foam - Front Nose Width: 54 mm - Developed for female riders who tilt their pelvis forward significantly and place more weight on the front area. The V-shaped saddle design therefore features a wide and short front section

The Gravelier represents the pinnacle of pedaling comfort and performance for gravel riders who put in big miles at an expeditious pace. Gravel riders tend to pedal in a forward-leaning position for long periods of time; the Gravelier accommodates this with a side profile that curves from tip-to-tail and cradles the pelvis to provide “locked-in” support. The perineal relief cutout improves blood ?ow and reduces numbness in sensitive areas when the hips are rotated forward in an aggressive, forward-leaning pedaling position. The Gravelier’s short 246mm length is paired with a mid-length section that quickly widens out to provide ample room if riders choose to shift beyond the primary support zone. Built for Speed. Built for Distance. Built for Gravel. - Center cutout reduces perineal pressure, improve blood ?ows and reduce numbness when the hips are rotated forward in an aggressive pedaling position - Stiff, yet responsive, fiber-infused Fusion Form base optimizes power transfer under hard efforts while also absorbing vibrations transferred through the bike - New Fusion Form base allows model-specific amounts of fiber to be infused into the nylon to create a ?ex profile that balances comfort and support - Pressure mapping technology was used to create a foundational shape based on anatomical science, which was then refined to create the perfect shape for gravel cycling - Extra width and padding in the nose to provide additional support when a rider scoots forward for maximum power - Extended rail clamping length provides a wide range of fore/aft saddle positions - Integrated under-saddle mount for tools and storage, compatible with existing brands of saddle accessories - Titanium saddle rails

The revered Silverado saddle has been updated with a shorter 265mm length and new Fusion Form base technology to provide the same comfort you know and love, but with a modern look! The design optimizes efficiency in a forward-leaning pedaling position with a fiber percentage similar to the recently released Gravelier saddle. Fusion Form also allows the padding to be recessed into the base, which provides a sleek aesthetic without actually reducing overall padding thickness. - Fusion Form technology fine tunes the amount of fiber infused into the nylon of each specific saddle model to create a flex profile that balances comfort, support and durability to match the intended use - Flat saddles allow riders to tilt their pelvis to varying degrees for different riding positions. Flat saddles are best for riders who prefer to utilize different sitting positions along the length of the saddle - Shorter 265mm length which allows for seamless on-off transitions while still providing plenty of room for riders to slide forward and maximize power output on steep climbs. Its shorter length allows riders to get deeper into the cockpit while avoiding interference with the nose of the saddle - Thinner padding provides just enough foundational squish to provide support during hard efforts, while also minimizing weight. Thin padding relies on saddle shape and base flex to provide ultimate comfort - Small window cut away from the centerline of the saddle base to provide additional relief from pressure on your sensitive areas. Comfort Zone is a subtle difference that provides impressive long-term comfort - Titanium saddle rails

The PN 3.0 is the sleek new saddle that will take your ride to the next level.  Starting from our Performance Narrow chassis, we used feedback from our professional athletes to make the next evolution in saddle design.  With a slightly wider 120mm rear end and an updated shape, the PN 3.0 is so comfortable, it will “disappear” underneath you. Key features: - All-new saddle shape Key features: - All-new saddle shape - Tapered-edge mold design for incredible comfort - Auto-racing inspired air vent chassis Commonly used for: - Road bikes - Triathlon bikes - Time Trial bikes Tech specs: - Category: Performance Narrow - Length: 255mm - Width: 120mm - Padding: 30-Series Foam - Rails: Proprietary Stainless Steel Alloy - Colors: Black, white, black with pink base, black with blue base - Tapered-edge mold design for incredible comfort - Auto-racing inspired air vent chassis

The PN 4.0 Performance Narrow saddle is similar in design to the award-winning PN 3.0, with increased sit bone contact points another 5mm to accommodate a range of pelvic/body positions. Like the other PN saddles, the PN 4.0 offers superb thigh and hamstring clearance, which allows for more rider body movement around the seat and is great for diving into fast corners. The nose-less design helps to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. - 125mm wide saddle allows for more relaxed pelvis tilt, ideal for road and gravel cycling - Proprietary Stainless Steel Alloy rails - Tapered-edge mold design for incredible comfort - 30-Series foam for comfort - Auto-racing inspired air vent chassis

New for 2018, ISM proudly introduces the PN 3.1. Starting from our PN 3.0 chassis, we added more padding for riders who prefer a slightly softer ride. With a 120mm rear end and and tapered edges, the PN 3.1 is so comfortable, it will “disappear” underneath you. Similar to the other PN saddles, the PN 3.1 offerings superb thigh and hamstring clearance. This allows for more rider body movement around the seat, and is great for diving into fast corners. Like all ISM saddles, the PN 3.1 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - All-new saddle shape - Tapered-edge mold design for incredible comfort - Auto-racing inspired air vent chassis Commonly used for: - Road bikes - Triathlon bikes - Time Trial bikes Tech specs: - Category: Performance Narrow - Length: 255mm - Width: 120mm - Padding: 40-Series Foam - Rails: Chromoly - Colors: Black, white

The PN 4.1 Performance Narrow saddle is similar in design to the PN 4.0, with increased padding for those looking to soften their ride. Sit bone contact points are wider at 125mm to better accommodate a range of pelvic/body positions. Like the other PN saddles, the PN 4.1 offers superb thigh and hamstring clearance, which allows for more rider body movement around the seat and is great for diving into fast corners. The nose-less design helps to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. - 125mm wide saddle allows for more relaxed pelvis tilt, ideal for road and gravel cycling - Chromoly rails - Tapered-edge mold design for incredible comfort - 40-Series foam for comfort - Auto-racing inspired air vent chassis

The PS 1.1 is the ideal time trial or triathlon saddle. Similar in design to the PS 1.0, it features the same sloped front arms, but slightly thicker 30-series padding, and budget-friendly chromoly rails. Similar to the other PS saddles, the PS 1.1 features an upward slope at the rear – providing superb hip support when your body is rotated forward in the aero position, or an aggressive road riding position. This tends to be preferred by athletes that don’t move around on the seat excessively while riding. It is also a top choice for triathletes and time trialists who ride in the aerobars, or for flat courses in which the athlete likes to ‘settle in’ to one position and go. Like all ISM saddles, the PS 1.1 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Sloped rear section provides maximum hip support - More padding than the PS 1.0 - Rear transition hook - Sloped front arms Commonly used for: - Triathlon bikes - Time Trial bikes Tech specs: - Category: Performance Short - Length: 250mm - Width: 130mm - Padding: 30-series Foam and Gel - Rails: Chromoly - Colors: Black, white

TEMPO ARGO R1 is a versatile endurance road saddle with a short-nose design and generous ischial support that encourages stability. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines. The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R1: a combination of a ride-compliant carbon-reinforced nylon shell and a highly stiff carbon rail - Wingflex: the shell's side edges flex and adapt to the rider's inner leg movement - Type 2 foam: progressive cushioning, with lower compression modulus SPECIFICATIONS: TEMPO ARGO R1 150 - Length: 260mm - Width: 150mm - Weight: 195g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 10 x 7mm SPECIFICATIONS: TEMPO ARGO R1 160 - Length: 260mm - Width: 160mm - Weight: 202g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 10 x 7mm

VENTO ARGO R1 is a performance racing saddle with a short-nose design that improves stability and allows for a more aggressive, aero riding position. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Vento Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the racing option, Vento Argo has been engineered to deliver a riding feel that suits race bikes with aggressive geometry. The padding is made from fizik's proprietary Type 1 foam formulation, which has a lower profile and is reactive and springy for instantaneous response and optimal power transfer. The purposeful shape of its design helps you achieve a better riding posture: the dropped nose supports the pubic ramus when the pelvis rotates forward to add power or to get more aero. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R1: a combination of a ride-compliant carbon-reinforced nylon shell and a highly stiff carbon rail - Type 1 foam: low-profile, reactive and springy for efficient power transfer SPECIFICATIONS: VENTO ARGO R1 140 - Length: 265mm - Width: 140mm - Weight: 179g - Height at 75mm width: 41mm - Length from nose to 75mm width: 114mm - Rail: 10 x 7mm SPECIFICATIONS: VENTO ARGO R1 150 - Length: 265mm - Width: 150mm - Weight: 186g - Height at 75mm width: 41mm - Length from nose to 75mm width: 114mm - Rail: 10 x 7mm

The PL 1.0 is the perfect saddle for your high performance bike. A fresh take on our Breakaway saddle, the PL 1.0 fits into the Performance Long category. It features bold new graphics, and all of the comfort you expect from ISM. All of the PL saddles are a full 275mm long, and allow for superb fore-aft rider movement. The rear measures 135mm wide – adding support for those that like to roll their hips back while climbing. Like all ISM saddles, the PL 1.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Long shape allows for fore-aft movement - Wider rear section than our Performance Narrow line Commonly used for: - Road bikes - Mountain bikes Tech specs: - Category: Performance Long - Length: 275mm - Width: 135mm - Padding: 30-Series Foam and Gel - Rails: CrN/Ti Alloy or Proprietary Stainless Steel Alloy - Colors: Black, white

A saddle that moves with you, the flexible performance of the C13 158mm Carved saddle comes from its vulcanized natural rubber and nylon top that is also durable and waterproof creating a saddle that is very light, yet comfortable. This is accomplished through a continuous carbon rail that increases strength and durability while eliminating performance-resistant contact points. Events like Paris-Brest-Paris, the Transcontinental, or the Silk Road Mountain Race require a comfortable saddle made for long distance cycling. The C13 158mm is the optimal width for cycle touring, brevet challenges, or audax races, or simply for anyone who wants a light and comfortable saddle for local racing or group rides. A "saddle with a hole," our Carved version has been made to decrease pressure in the perineal region, and is therefore more flexible than the standard C13 models. Materials - Carbon frame - Naturally flexible rubber - Moves with you - All-surface vibration absorption - Continuously comfortable - UV & abrasion resistant - Weatherproof nylon cover Specifications - Length: 275mm - Width: 158mm - Height: 55mm - Weight: 295g

A saddle that moves with you, the flexible performance of the C13 158mm saddle comes from its vulcanized natural rubber and nylon top that is also durable and waterproof creating a saddle that is very light, yet comfortable. This is accomplished through a continuous carbon rail that increases strength and durability while eliminating performance-resistant contact points. Events like Paris-Brest-Paris, the Transcontinental, or the Silk Road Mountain Race require a comfortable saddle made for long distance cycling. The C13 158mm is the optimal width for cycle touring, brevet challenges, or audax races, or simply for anyone who wants a light and comfortable saddle for local racing or group rides. Materials - Carbon frame - Naturally flexible rubber - Moves with you - All-surface vibration absorption - Continuously comfortable - UV & abrasion resistant - Weatherproof nylon cover Specifications - Length: 275mm - Width: 158mm - Height: 55mm - Weight: 310g

The carbon framed, Cambium C13 All Weather utilizes waterproof nylon on its vulcanized natural rubber top for added durability and increased flex, offering truly waterproof performance for high-mileage, all-season cyclists. The Carbon C13 is the lightest Cambium in the range and features a uniquely flexible top to absorb shocks and vibrations for better comfort and control. - The 132mm width is most suitable for racing and shorter distances where weight savings are desired - The 145mm width is suitable racing, longer distances, and fast adventure cycling where weight savings and all-day comfort are desired - Oval carbon rails - Made in Italy - Length: 275 mm - Height: 55 mm - Weight: 259g (132mm) / 280g (145mm)

The carbon framed, Cambium C13 All Weather utilizes waterproof nylon on its vulcanized natural rubber top for added durability and increased flex, offering truly waterproof performance for high-mileage, all-season cyclists. The Carbon C13 is the lightest Cambium in the range and features a uniquely flexible top to absorb shocks and vibrations for better comfort and control. The carved version features a hole for increased flexibility and pressure relief whilst racing or cycling up to middle distances. - Oval carbon rails - Made in Italy - Length: 275 mm - Height: 55 mm - Weight: 259g (132mm) / 280g (145mm)

The Butterfly Carbon is the lightest of the Butterflies thanks to the addition of carbon rails. It's wider in the rear than typical saddles for good support of a woman's sit bones. The Butterfly Carbon's low profile, flat top, and a complete cutaway through the center are designed to provide pressure relief and support in the right areas. Injection-molded foam is used to provide the right balance of softness and stiffness so you won't sink into the saddle the longer you ride. - Black leather with gloss butterfly graphic and patent leather rear - Signature Butterfly cutaway through the center of the saddle for pressure relief - Length x width: 262mm x 155mm - Weight: 218 grams; 7.7 ounces - Rails: lightest weight Carbon 10mm H (+/- .5mm) x 7mm W (+/- .5mm) note: check seat post for compatibility as it may require an adapter kit (available from some seat post manufacturers)

The PL 1.1 is a new version of our very popular Prologue saddle, with updated racing graphics. Like the other PL models, it features a full 275mm length, and generous 135mm rear section – perfect for riders who rotate back while climbing. Compared to the PL 1.0, the 1.1 has an increased level of padding – ideal for riding in thin triathlon-style shorts, or for anyone who simply wants a softer ride. Like all ISM saddles, the PL 1.1 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Long shape allows for fore-aft movement - Wider rear section than Performance Narrow - Most padding available in Performance Long Commonly used for: - Road bikes - Mountain bikes Tech specs: - Category: Performance Long - Length: 275mm - Width: 135mm - Padding: 40-Series Foam and Gel - Rails: Chromoly - Colors: Black, white

The PM 2.0 an update of our Peak saddle. PM saddles incorporate a rounded and sloped rear end, allowing the rider to move up-and-over the back of the seat on technical trails. The PM 2.0 also excels at long-distance events, such as 24-hour racing. With long hours in the saddle, nobody wants to go numb – and this is your perfect weapon. Like all ISM saddles, the PM 2.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Sloped rear for clearance on technical trails - Same basic design as the popular Performance Short models Commonly used for: - Mountain bikes Tech specs: - Category: Performance Mountain - Length: 260mm - Width: 130mm - Padding: 30-series Foam and Gel - Rails: Chromoly - Color: Black

The Tempo Aliante R1 is a lightweight endurance cycling saddle, featuring a waved profile, generous central cut-out, carbon reinforced shell and full carbon rails to balance support, comfort, and performance. - ALIANTE: Waved profile saddle designed to maximize comfort, support and pressure relief - R1: Combination of a ride-compliant, carbon-reinforced nylon shell and a highly stiff carbon rail - WINGFLEX: The shell's side edges flex and adapt to the rider's inner leg movement - DOUBLE DENSITY FOAM: Firmer on the ischial bones, softer on the nose, for optimal comfort in every riding position