Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

$50.00
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
$39.95
Topeak's Rocket Ratchet features a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots and includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T25 Torx and #2 Phillips bits, 2 plastic tire levers and magnetic bit holder. It's everything you need in a compact, lightweight package.
$8.79
- 6 function mutli tool - Hex keys: 3/4/5/6mm - Flathead and Phillips screwdrivers
$14.00
- Removes square, ISIS, and Octalink style cranks - Recessed threads won't damage crank threads
$26.98
- Ergonomic 22-tooth BB tool - Shimano or ISIS compatible - For installation and removal - Hardened and nickel-plated steel - Dual-compound ergonomic handle
$20.00
- 5 DART plugs for use with the Stan's NoTubes DART tool
$74.00
Shimano Genuine Professional disc brake bleed kit Includes: - TL-BR002 Funnel unit for ST series Road Brake lever (M7 thread bleed port) - TL-BR003 Funnel unit for BL series MTB brake lever (M5 thread bleed port) - TL-BR001 Syringe unit - 4-pcs set of Bleed Blocks (Piston spacer) Features: - New oil spill guard lid with an integrated oil stopper holder - Improved syringe unit design now using a stronger threaded tube joint and revised locking clip - Bleeding instructions available for download under 'Documents & Links' below
$6.00
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
$52.00
SRAM's Cable Cutter features sharp, spring-loaded diamond-shaped jaws and ergonomic handles to cleanly cut cables and housing every time. It also has jaws for crimping cable crimps and a hidden awl for opening housing ends after cutting, if needed. Plus, there's a safety to keep this fine tool closed when not in use.
$17.00 - $25.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$50.00
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.
$25.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Bluto RL/RCT3 (2017+)
$17.00 - $45.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$20.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)
$19.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)
$25.00
The smartest, most convenient torque key now comes with enough bits to suit every need. Make sure those stem bolts are tight enough, and double check the torque on the seatpost bolt while you're at it. The Ritchey Bicycle Torque Key is an essential tool for those important bolts. Available with 4 or 5Nm options, this 6-bit set includes just about every bit you'll need for your bike, and a convenient holder to keep it all organized. - Hex 3/4/5mm - Torx T-20/25 - Phillips #1 - 4 or 5Nm max torque - Bit holder included
$125.00
• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box
$30.00
- Chrome plated tools - T10/T15/T20/T25/T30/T40/T45/T50 - Included key holder
$36.00
- Made from heat-treated tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, cushioned grip, and high leverage design for comfort and ease of use. - Quickly and cleanly cuts brake and derailleur cables, housing, and other wires. Cable cutters are an essential tool used for some of the most fundamental elements on the bicycle. What seems like a simple tool can often be the root of frustration when poor cut quality ruins a brand new cable, crimps housing shut, or leaves strands uncut. The Pedro's Cable Cutter is an industry favorite and when put to the test against the competition and you will quickly see why. Our cable cutter is designed for years of service, for comfortable and easy usage, and with extra jaw overlap ensuring a clean cut every time. The Cable Cutter is designed for cutting steel cables (wire rope) up to 4mm in diameter. Backed by Pedro's lifetime warranty.
$13.00
- Made from heat-treated tool steel for the ultimate in strength and lasting performance. - Professional quality, precision sized for the perfect fit. - Fits all Campagnolo cassette lockrings and Record, Chorus, Centaur, and Athena bottom brackets. - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise. Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. The Campy BB and Cassette Socket is designed to fit over Campagnolo bottom bracket spindles and work seamlessly with Pedro's snap-channel Pro Socket handle, any 24mm socket/wrench, or in a bench vise. Backed by Pedro's lifetime warranty.
$44.99
Torque wrenches are an essential bicycle tool. The increase in carbon fiber bikes and components have driven this need. While carbon fiber allows for more optimal design and provides higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1% and is then tested 5 times prior to packaging with results recorded on the product card along with the date. A magnetic socket drive accepts standard 1/4" hex bits and 4mm, 5mm, and T25 bits are included with each wrench. The ergonomic handle design provides comfort and control ready for daily use while also storing two extra bits. - Infinite torque-limiting clutch design eliminates over-torquing - Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included - Ergonomic handle design provides comfort and control and stores extra bits
$131.76
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
$11.00
Y-Style Hex Wrench - Perfect for common hex hardware found on modern bicycles and components. - New improved ergonomic Y-style handle design. - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication. - Designed to stand up to the harsh conditions of professional use. - Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use. - The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification. - Backed by Pedro's lifetime warranty.
$16.95
Having trouble getting at internal nipples? Park's 3-Way Internal Nipple Wrench comes to your rescue. It features a 3.2mm square drive, as well as 5 and 5.5mm hex sockets that slip perfectly into the tight surroundings of most rims. It also utilizes Park's innovative Y-shape design that provides heaps of leverage and comfort.
$14.95
Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.
$14.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$12.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$71.95
Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.
$16.95
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
$23.95
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
Page 1 of 24 Next page